Antique Tractors Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Poor little 35 is missing a few nuts...
Not sure if its been raided for parts in the past or if its a partial repair job.
Its the end of the bar that ties the front axle to the body by the brake pedals and its the 3 by the pedals that are missing.
I am sure the bar has a proper name but i cannot find it in the pdf workshop manual i found online.

Anyways. the nuts are missing, does anyone know what size etc they are so i can get some replacements.


When buying these are there other standard sizes used on these tractors that would be worth getting so i have some spares as i invetigate things further.

Thanks.

Jon.
 

·
Registered
Joined
·
168 Posts
KRAFT setting in 7/16 or 1/2 inch fine thread .
i think . if on the other side it takes 5/8 or 11/16 wrench 7/16 nut fine thread .
if it a 3/4 wrench it would be 1/2 inch fine thread nut .
 
1 - 4 of 4 Posts
Top