Antique Tractors Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
320 Posts
I also use 220-240 grit when sanding. Never use anything really coarse as it will leave permanent scratch marks. Then, apply a couple of coats of primer over it when you get it smoothed out. When you wet sand the primer before painting, don't sand so much that you lose the primer covering the spot putty.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top