Antique Tractors Forum banner

Disc Harrow Identification

3 reading
1K views 5 replies 5 participants last post by  Timobrian  
#1 ·
Hello, I am new to the forum and looking for some help identifying a disc I recently purchased. Have disassembled one of the gangs needing repairs but can’t find parts. These are the bearing casings
Image


Here are the bearings


Image

here is disc with one gang removed. Appreciate any help so I can try to locate parts.
Image
 
#2 ·
If you have not done so, look closely for an ID tag or a manufacturer's logo. I cannot identify it. I do not believe it has sealed or ball bearings, but the raised areas on the disc spacers serve as the bearings and have to be greased often. Some older discs had wooden boxings, and they had to be greased too. Wish I could offer more. A guess is that it favors a Ford or Massey Ferguson disc.
 
#3 ·
Thanks Jim, I have gone over it several times looking for any ID will look again. Very unique set up but yes need to keep it greases. That’s what the issue is, wasn’t greased often and the “bearing” has worn through the casing so won’t hold grease. There cast so welding up the hole not an option.
 
#4 ·
I have searched and searched but cannot find anything that looks like yours. There is a new wheel spacer I see. Maybe you can identify that and it will lead you to a new bearing housing.
 
#6 ·
Hello, I am new to the forum and looking for some help identifying a disc I recently purchased. Have disassembled one of the gangs needing repairs but can’t find parts. These are the bearing casings View attachment 24944

Here are the bearings


View attachment 24946
here is disc with one gang removed. Appreciate any help so I can try to locate parts.
View attachment 24947
MY WEB SEARCHED -

If you have not done so, look closely for an ID tag or a manufacturer's logo. I cannot identify it. I do not believe it has sealed or ball bearings, but the raised areas on the disc spacers serve as the bearings and have to be greased often. Some older discs had wooden boxings, and they
Hello, I am new to the forum and looking for some help identifying a disc I recently purchased. Have disassembled one of the gangs needing repairs but can’t find parts. These are the bearing casings View attachment 24944

Here are the bearings


View attachment 24946
here is disc with one gang removed. Appreciate any help so I can try to locate parts.
View attachment 24947
My search-- "SPOOL"
$32.29
Disc Harrow Full Spool fits Case IH RMX340 340 475 496 3800 3850 3900 3950 4400 4450 139918C1 === website is Disc Harrow Full Spool fits Case IH RMX340 340 475 496 3800 3850 3900 3950 4400 4450 139918C1... GOOD LUCK