Antique Tractors Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
We have just got a 2010 JD has been sitting in a padock for 17 years i'am looking for 2 turbulance chambers can you still buy them I would like to get it runing again :)


I puled the other 2 out
 

·
Administrator
Joined
·
4,122 Posts
I found several different part numbers at John Deere parts books
Kind of confusing to find what you need , sub for this, sub for that. different part numbers for serial number breaks.
Maybe you can find what you need by searching the parts books link.
 

·
Registered
Joined
·
320 Posts
I would think Deere still has these. Be ready to pony up some cash though.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #4
BigDaveinKY said:
I found several different part numbers at John Deere parts books
Kind of confusing to find what you need , sub for this, sub for that. different part numbers for serial number breaks.
Maybe you can find what you need by searching the parts books link.
Hi the 2010 is missing two injection chambers any idea where i can get some in Australia or USA Thanks John :)
 

·
Administrator
Joined
·
4,122 Posts
q4016lanz said:
BigDaveinKY said:
I found several different part numbers at John Deere parts books
Kind of confusing to find what you need , sub for this, sub for that. different part numbers for serial number breaks.
Maybe you can find what you need by searching the parts books link.
Hi the 2010 is missing two injection chambers any idea where i can get some in Australia or USA Thanks John :)
Click on the blue (John deere parts books) above. it's a link that will take you to their site.
Type in your model number 2010 Once you find the manual for your machine, Open sectional list , then fuel and air, #54 and 55 are turbulence chamber pages.
There are several part numbers listed for the 2010 turbulence chamber by serial number breaks. AT16746, T18533, T11222, T18841
Find the one for your tractor and take it to a Deere dealer, Should be able to get what you need.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #7
BigDaveinKY said:
q4016lanz said:
BigDaveinKY said:
I found several different part numbers at John Deere parts books
Kind of confusing to find what you need , sub for this, sub for that. different part numbers for serial number breaks.
Maybe you can find what you need by searching the parts books link.
Hi the 2010 is missing two injection chambers any idea where i can get some in Australia or USA Thanks John :)
Click on the blue (John deere parts books) above. it's a link that will take you to their site.
Type in your model number 2010 Once you find the manual for your machine, Open sectional list , then fuel and air, #54 and 55 are turbulence chamber pages.
There are several part numbers listed for the 2010 turbulence chamber by serial number breaks. AT16746, T18533, T11222, T18841
Find the one for your tractor and take it to a Deere dealer, Should be able to get what you need.
:) Thanks mate it has been a great help for serial numbers i will try to find used turbulence chalmbers No AT 16746T :)
Thanks John :)
 
1 - 7 of 7 Posts
Top