Antique Tractors Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
311 Posts
Discussion Starter #1
I got the mag rebuild kit today for an H. This is not my tractor and it was using the mag as a drive to the points and had a coil hanging on the outside of the tractor. The owner wanted to return it to the mag set up. The coil in the mag was gone and I'm thinking something is missing. Does the coil just set in there or is there something runs thru it to bolt it down? I have searched the web but everything I find is not helpful. Thanks for any help..... mike
 

·
Registered
Joined
·
134 Posts
Let folks know what type or model you have. H4 or j4 or anther type I haven't said. Wish I could help but never tore into a mag.
 

·
Registered
Joined
·
133 Posts
On the side of the mag, is there an IHC stamped in there? any numbers? i have the blue ribbon mag and can help you with probably anything you need.

There is two screws that go into either side of the coil that hold it into the mag. There really isn't much to those mags.
 
1 - 4 of 4 Posts
Top