Antique Tractors Forum banner

Misc pics from 2011 Aus Rally at Pinjarra

2304 Views 4 Replies 5 Participants Last post by  Aussie John

Has anyone ever made a tractor balance??? could do with some ideas pls
See less See more
1 - 1 of 5 Posts
Shelly, a couple of balances I have used have been made from old truck trays with a steel beam approx 4" wide across the center underneath. This cross beam needs to be sitting on a hard base to give a firm pivot. The tray ideally would have a wooden deck which is not slippery for tracks or steel wheels or heavy conveyor belt over steel for safety.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.