Antique Tractors Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
I am in the process of reworking my Oliver 66 and need some clutch parts. I have tried online(Google) but it is so confusing. Can any of you Oliver guys tell me where I can purchase a new clutch disc and pressure plate? Also need a pilot bearing and throw out bearing. Would like to purchase it all from the same source if possible. Ant ideas or sources come to mind?

Thanks,
JHolland
 

·
Registered
Joined
·
395 Posts
if its a 9 in plate a and i has one in grandy quebec they would have to bring back to us could take a week or two 9 in disc in stock and release bearing in u s you just have to locate a and i dealer in u s or googgle a and i tracter parts complete set around 200 dollars i just checked if you have trouble pm me there is a serial no breaking point for 8 to 9 inch
 

·
Registered
Joined
·
438 Posts
An 8" or a 9 1/4" disc/pressure plate came on a 66.Once you get it apart you'll know which one you have. Where are you located? There should be a dealer near you that can get it for you. If not, UPS will deiver.
 

·
Registered
Joined
·
61 Posts
Discussion Starter · #4 ·
I will measure it tomorrow and post results. Still would like to purchase all of it from one source or maybe two.

Thanks,
JHolland
 
1 - 4 of 4 Posts
Top