Antique Tractors Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
341 Posts
First I would check for binding linkage. If everything's moving as it should, see if it has an original looking spring, it will be a large diameter coil spring with I believe 4 or 5 coils. If that's al okay then I would remove the governor from the tractor and inspect the thrust bearing and weights, if the ball bearing came apart it will get stuck wide open.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top