Antique Tractors Forum banner

Thread direction

2141 Views 3 Replies 3 Participants Last post by  4imnotright
Need to remove the belt pulley on my Allis Chalmers C. Does anyone know if the nut thread is right or left hand?
1 - 4 of 4 Posts
Should be right handed threads. BUT let me check in the morning!!!!
I just ran outside real quick (17 degrees) and two threads are exposed past the nut and though its crusted with dirt it looks like right handed threads.
missouri massey man said:
I just ran outside real quick (17 degrees) and two threads are exposed past the nut and though its crusted with dirt it looks like right handed threads.
Wendell, thanks for looking. Maybe you should have butchered the beef today and looked at the thread direction saturday ;) Have you had to build a fire in the cooler yet?

bertman said:
Should be right handed threads. BUT let me check in the morning!!!!
Thanks for the reply
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top