Antique Tractors Forum banner
1 - 2 of 4 Posts

· Registered
Joined
·
2,471 Posts
Using a one wire, just run the wire to the gauge, then the battery/starter switch/or where ever you can get it to the battery. I assume you are using the steering shaft starter switch, so run the wire there, on the battery side. Me personally, Id put a normally open oil pressure switch up near the OP gauge and go through that first.
 
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top